I get all my car work done at Llandudno Motors. They look after me superbly, tell me when I should buy original replacement parts or when I can buy equally good copies far cheaper. Labour charges are very reasonable and you can save a fortune compared to main dealers.
I get all my car work done at Llandudno Motors
The useful and informative discussion about my £100+ per hour plumbing bill seems to have been removed ( no names were mentioned). Presumably the moderator is a plumber ?Ian has moved the discussion into this thread:
What are acceptable rates for skilled tradesmen ? Isn't that part of the perception of who is good or bad too ?
Just had a some new wrought iron gates, (2 sets), and new railings installed at Fester Towers.
A brilliant job, and a very decent price... by,
RW Welding and Mechanical. 01492 525956
Highly recommended for Steel or Ironwork.
Martin Barritt & Son may be worth a try Dave. Llandudno based, he has done work for our church, reasonable and reliable.
contact: martin.barritt@googlemail.com Mobile 07818 447821
Our Up-and-over garage door broke on Monday and no one seemed to know of a repairer. We eventually found a chap and not only does he give yu a quote on the 'phone, but he's extremely good, doesn't charge VAT and left the garage door working better than we can remember.
Mike Hulse,
Garage door repair specialist 01745 337820
(No VAT)
Another one from me. The driveway on our new house is tight and could do with widening. Its previously been hit by a vehicle and the missus track record doesnt bode well.
So I need a Stonemason and an Iron gate fabricator. Any recommendations? Thanks.
Thanks Fester.
Any recommendations for removing an unwanted 3 piece suite rather urgently? Council will take ages I guess...
Thanks Fester.
Any recommendations for removing an unwanted 3 piece suite rather urgently? Council will take ages I guess...
If it's in reasonable condition, try the charities, Heart foundation. St Davids or St Vincent's. ££$
We have developed problems with the door handles on both our patio door and black door.
Can someone please recommend a tradesman who can come and carry out repairs without being more interested in selling us new double glazing?
I used Conels kitchen and bedrooms, https://www.conels.co.uk/ (https://www.conels.co.uk/) family business, and highly recommend them.
I used Conels kitchen and bedrooms, https://www.conels.co.uk/ (https://www.conels.co.uk/) family business, and highly recommend them.Nice one Steve, I'll take a peek.
I used Conels kitchen and bedrooms, https://www.conels.co.uk/ (https://www.conels.co.uk/) family business, and highly recommend them.Nice one Steve, I'll take a peek.
As a further recommendation, two years after the kitchen was fitted, we had a small problem with two of the kitchen cabinet doors, I was going to repair them myself, just a bit of glue, but I phoned Darus first for advice, he came round, phoned the supplier, and arranged to replace every door, all eighteen of them, now that's what I call after sales service.
Fester, we are new to the area but had need of a plumber to do an inspection of the central heating and address a few minor issues in the rental place we are in. Fellow's name is Mark, he is in my phone as Mark the plumber - I don't know his surname or company name. I would recommend him, courteous, knowledgeable and reliable. Phone 0783 6617522
Any suggestions?
Just don't try slotting them in if there's even a sight breeze...
Thanks Nemesis
Both those numbers give the response that the number has not been recognised so he must have moved from the area or maybe retired.
Thanks Meleri. I will contact them on Monday.
Thanks NemesisSorry about that Bellringer, will have to investigate.
Both those numbers give the response that the number has not been recognised so he must have moved from the area or maybe retired.
I have used Spares & Repairs from Colwyn Bay & had excellent service from them, when they fixing my oven grill Telephone 01492534200
Hugo just stick to tax matters 😂, Give this lad a call clean machine 860231, he does repairs see if he can help.
Hi Norman08
Hope the new manager bounce has worn off. It could be a rough afternoon , but I would not want to spend it with the red side. &shake&
Back to topic.
Can anyone recommend a local person who deals with repairs of electric Chainsaws?
I have a pole chainsaw and I've used it quite often this week until the belt became loose. I've put the belt back on but it's not cutting now and when I've tried to cut things the circuit breaker has cut off the electricity supply
I suspect that I've put the cutting edge of the belt in the opposite rotation to the blade but I'd rather someone check it over for me
I've just been to Screwfix and Denbigh Pland Hire but neither firm were interested in looking at the chainsaw
I found a You tube video possibly of some help... when you say belt, do you mean the cutting chain, because that does loosen and it is very easy to put it on backwards, make sure the teeth are pointing forwards.
video https://www.youtube.com/watch?v=D90AvoTU6RM
My pole chainsaw in the video is exactly like mine and I found the video very helpful. I fitted the cutting chain like the guy demonstrated and it appeared to be working fine BUT when I have tried to saw anything then the machine cut out. The circuit breaker was not triggered by the pole cutting out so the fault is somewhere in the pole.
It needs a professional to have a look at it so I'll take Hammy's advice and try Lucas Plant Hire in Llandudno Junction.
Thanks Steve and Hammy for your replies it's really appreciated
Hugo,
You could try Lucas Plant Hire in Llandudno Junction, they have attended to one of my electric chainsaws in the past.
The lady next door to me had a lad from Rhuddlan Avenue, just up the road from me, who calls his firm "Gutter Pro", He used a suction system and she was very happy with the result, as she has just bought the property and the previous owner had never had the gutters cleaned since the conservatory was built in the nineties. I don't know how much he charged but I'm sure he would give you a price.